R-Drive Image 4.5 Build 4507

R-Drive Image 4.5 Build 4507 | 11,47 Mb

R-Drive Image is an effective tool for creating image files and backup data. File image of a disk that contains the exact, byte for byte "a copy of your hard disk, partition or logical disk can be created without rebooting the computer and with different levels of data compression. The created image can be saved to various types of media, including removable media such as CD-R (W) / DVD, Iomega Zip and Jazz drives. R-Drive Image is one of the best utilities Backup and restore data to prevent catastrophic losses after irreversible disruption of opterating system or hardware.

R-Drive Image restores the disk image on the original disk to another partition or free space unformatted disk without rebooting the system. To restore the system or blocked section of R-Drive Image is switched to pseudographic mode directly from windows or bootable version of the program is run from a CD or set of floppy disks.

Using R-Drive Image, you can quickly and fully restore the system after the total loss of data due to system failure, virus attack or incident, the computer hardware You can also use R-Drive Image for mass cloning system when necessary to install one already configured the system for several identical computers. In other words, you can manually configure a system to create its image and then deploy that image to the other identical machines, saving time and money. If you need to restore a few files, a disk image can be attached as a virtual disk, the data from it, ie, directly from the disk image, easily copied through Windows Explorer or other file utilities.

Features R-Drive Image:
• Simple and convenient user interface - does not require in-depth knowledge of computer management
• Perform operations on the fly ": A disk image created without the need to stop and restart the operating system Windows. In the process of creating an image and before the completion of all remaining transaction records stored in the cache. Restoring an image as being "on the fly" with the exception of the system partition. When restoring a system partition, you must restart the program in pseudographic mode directly from Windows or by using pre-created bootable disk (CD / DVD or floppy disk)
• Compress files, images. To save disk space image files can be compressed
• Support for removable media devices. Files Images can be stored on removable media device type CD-R (W) / DVD, Iomega Zip and Jazz Drives
• Support networks of Microsoft. Charging R-Drive Image CD / DVD version in favor of retaining the image on the remote computer, and his recovery from a remote computer on a local network in Microsoft (CIFS protocol)
• pseudographic mode. Reboot in pseudographic regime, to restore to the system or any other locked partition is carried out directly from Windows. There is no need to use a bootable CD / DVD
• Extended list of supported devices. Large list of computer hardware components, supported by
• USB 2.0 supported pseudographic mode. While the cost of hard disks and removable steadily declining, a removable USB 2.0 drive (flash drive) may be the best and reliable solution for backing up the system and other parts in laptop computers. There is no need for a reliable CD / DVD and slow CD / DVD recorders
• The boot version. Special boot disk (two floppy disks or a CD / DVD) are created to restore a system partition on the
• Restore individual files and folders. A disk image can be connected as a virtual disk, accessible only for reading, and its contents can be seen and copied
• Splitting the image file. File image of a disk can be divided into several files, with little space for storage on a single carrier
• Protection of the image. Image file can be password protected and contain additional comments
• Converting a file system. File system disk can be restored skonvertirovana (for example, FAT16 to FAT32 and vice versa)
• Creation of new sections. This image can be restored to the free disk space. Size restored partition can be changed
• Replacement parts. This image can be restored to any existing partition. The program can delete the existing partitions and restore the image to release the free space
• Copying a disc to disc. A disc can be copied to any other, the same or larger capacity
• Checking the created image. File image of a disk can be checked for the correctness of its creation before it is stored and / or restored
• Schedule. The task of creating a disk image can be installed and executed at a certain time in the automatic mode
• Create a script for the frequent and automatic action. The program interface allows you to create scripts to automatically create the image file and add data to an existing image file. Scripts are executed from the command line and this line may be included in a batch file
• Notification of the operation. The program automatically creates and sends a notification via e-mail, and can run an external utility, when the image was successfully created or the operation of its creation has not been implemented

download